Hello,
Been troubleshooting this one for a few days. I'm trying to get files processed with tickit from an FTN. The files get to my fido\inbound correctly. I have a password configured in echocfg for ticfilepwd, and confirmed it's there under the node in sbbsecho.ini.

[node:21:4/100@fsxNet]
Name = fsxNet
Comment =
Archive = ZIP
PacketType = 2+
PacketPwd =
AreaFix = true
AreaFixPwd = MYPW
SessionPwd = MYPW
TicFilePwd = MYPW

What I'm seeing is:

7/1 07:48:02a TICKIT Parsing ../fido/inbound\0th2942p.tic
7/1 07:48:02a TICKIT Configured TicFilePwd is empty, but TIC file has a password, node: 21:4/100
7/1 07:48:02a TICKIT Configured TicFilePwd is empty, but TIC file has a password, node: 21:4/100@fsxnet
7/1 07:48:02a TICKIT No password matched for sender 21:4/100 or 21:4/100@fsxnet.
7/1 07:48:02a TICKIT Please check the defined password for this sender.

I have other FTN confiruations that seem to work ok using the same setup.

I'm wondering where maybe to look as I'm out of ideas.

Thanks!
Convolution BBS - Convolution.us

...We've got Armadillos in our trousers.

---
þ Synchronet þ convolution bbs - convolution.us
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Re: TICKIT Configured TicFilePwd is empty
By: Basis to All on Tue Jul 01 2025 07:58 am

Hello,
Been troubleshooting this one for a few days. I'm trying to get files processed with tickit from an FTN. The files get to my fido\inbound correctly. I have a password configured in echocfg for ticfilepwd, and confirmed it's there under the node in sbbsecho.ini.

[node:21:4/100@fsxNet]
Name = fsxNet
Comment =
Archive = ZIP
PacketType = 2+
PacketPwd =
AreaFix = true
AreaFixPwd = MYPW
SessionPwd = MYPW
TicFilePwd = MYPW

What I'm seeing is:

7/1 07:48:02a TICKIT Parsing ../fido/inbound\0th2942p.tic
7/1 07:48:02a TICKIT Configured TicFilePwd is empty, but TIC file has a password, node: 21:4/100

I have other FTN confiruations that seem to work ok using the same setup.

I'm wondering where maybe to look as I'm out of ideas.

The problem (a frequent one with TickIT) is that "21:4/100" is not the same address as "21:4/100@fsxnet". Either remove the domain from the linked node configuration in echocfg or add it to the tickit cfg (if it supports 5D addresses, I don't remember).
--
digital man (rob)

Sling Blade quote #1:
Karl: I've killed Doyle with a lawn mower blade. Yes, I'm right sure of it. Norco, CA WX: 85.1øF, 39.0% humidity, 11 mph W wind, 0.00 inches rain/24hrs
--- SBBSecho 3.28-Linux
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)

Basis wrote to All <=-

Hello,
Been troubleshooting this one for a few days. I'm trying to get files processed with tickit from an FTN. The files get to my fido\inbound correctly. I have a password configured in echocfg for ticfilepwd, and confirmed it's there under the node in sbbsecho.ini.

[node:21:4/100@fsxNet]
Name = fsxNet
Comment =
Archive = ZIP
PacketType = 2+
PacketPwd =
AreaFix = true
AreaFixPwd = MYPW
SessionPwd = MYPW
TicFilePwd = MYPW

What I'm seeing is:

7/1 07:48:02a TICKIT Parsing ../fido/inbound\0th2942p.tic
7/1 07:48:02a TICKIT Configured TicFilePwd is empty, but TIC file
has a password, node: 21:4/100
7/1 07:48:02a TICKIT Configured TicFilePwd is empty, but TIC file
has a password, node: 21:4/100@fsxnet
7/1 07:48:02a TICKIT No password matched for sender 21:4/100 or 21:4/100@fsxnet.
7/1 07:48:02a TICKIT Please check the defined password for this sender.

I have other FTN confiruations that seem to work ok using the same
setup.

I'm wondering where maybe to look as I'm out of ideas.

Not completely sure this will help, but I'd suggest removing the
"@fsxNet" from the Node Definition block. It's not required and I think
it can cause problems. Do you have the fsxNet zone specified in a
[domain] block in your sbbsecho.ini file?



... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
* Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)